View HD74HC4066FPEL_4308216.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HD74HC4066
Quad Analog Switches/Quad Multiplexers
REJ03D0651-0200 (Previous ADE-205-538) Rev.2.00 Mar 30, 2006
Description
This switch has low "on" resistance and low "off" leakage. It is a bidirectional switch, thus any analog input may be used as an output and vice-versa. Also the HD74HC4066 switch contains linearization circuitry which lowers the "on" resistance and increases switch linearity. The HD74HC4066 device allows control of up to 12 V (peak) analog signals with digital control signals of the same range. Each switch has its own control input which disables each switch when low.
Features
* High Speed Operation * Wide Operating Voltage: VCC = 2 to 6 V * Low Quiescent Supply Current: ICC (static) = 1 A max (Ta = 25C) * Ordering Information
Part Name HD74HC4066P HD74HC4066FPEL HD74HC4066RPEL HD74HC4066TELL Package Type DILP-14 pin SOP-14 pin (JEITA) SOP-14 pin (JEDEC) TSSOP-14 pin Package Code (Previous Code) PRDP0014AB-B (DP-14AV) PRSP0014DF-B (FP-14DAV) PRSP0014DE-A (FP-14DNV) PTSP0014JA-B (TTP-14DV) Package Abbreviation P FP RP T -- EL (2,000 pcs/reel) EL (2,500 pcs/reel) ELL (2,000 pcs/reel) Taping Abbreviation (Quantity)
Note: Please consult the sales office for the above package availability.
Function Table
Control L H GND Vin VCC GND Vout VCC Switch OFF ON
Rev.2.00 Mar 30, 2006 page 1 of 9
HD74HC4066
Pin Arrangement
In 1 Out 1 Out 2 In 2 Control 2 Control 3 GND
1
In C
14 VCC 13 Control 1 12 Control 4
In Out C C
2 3 4 5 6
Out
11 In 4 10 Out 4 9
Out
Out
In
C In
Out 3 In 3
7
8
(Top view)
Logic Diagram
In/Out
Out/In
Control
Absolute Maximum Ratings
Item Supply voltage Control input voltage Switch I/O voltage Supply current Switch I/O current (per pin) Control input diode current Switch I/O diode current Power dissipation Storage temperature range (VCC) (GND) Symbol VCC VC VIN/OUT ICC IGND IIN/OUT IIK IIOK PT Tstg Rating -0.5 to +7.0 - 0.5 to VCC + 0.5 - 0.5 to VCC + 0.5 +50 -50 25 20 20 500 -65 to +150 Unit V V V mA mA mA mA mA mW C
Rev.2.00 Mar 30, 2006 page 2 of 9
HD74HC4066
Recommended Operating Conditions
Item Supply voltage Control input voltage Switch I/O voltage Operating temperature Input rise/fall time VCC = 2.0 V VCC = 4.5 V VCC = 6.0 V Symbol VCC VC VIN/OUT Topr tr , tf Min 2 0 0 -40 0 0 0 Typ -- -- -- -- -- -- -- Max 6 VCC VCC +85 1000 500 400 Unit V V V C ns ns ns
Electrical Characteristics
Ta = 25C Item Control input voltage Symbol VCC (V) VIH 2.0 4.5 6.0 VIL 2.0 4.5 6.0 2.0 4.5 6.0 ON resistance between any two channels OFF channel leakage current (switch off) OFF channel leakage current (switch on) Control input current Quiescent supply current RON 2.0 4.5 6.0 6.0 Min 1.5 3.15 4.2 -- -- -- -- -- -- -- -- -- -- Typ -- -- -- -- -- -- 2000 100 60 50 3 2 -- Max -- -- -- 0.5 1.35 1.8 5000 200 170 -- -- -- 0.1 Ta = -40 to+85C Min 1.5 3.15 4.2 -- -- -- -- -- -- -- -- -- -- Max -- -- -- 0.5 1.35 1.8 6250 250 210 -- -- -- 1.0 V Unit V Test Conditions
"ON" resistance
RON
VC = VIH Vin = 0 to VCC Iin/out = 1 mA VC = VIH, Iin/out = 1 mA between any two channels VC = VIL VIN = VCC, Vout = GND or, Vin = GND, Vout = VCC VC = VIH Vin = VCC or GND Vin = VCC or GND Vin = VCC or GND
IS (OFF)
A
IS (ON)
6.0
--
--
0.1
--
1.0
A
Iin ICC
6.0 6.0
-- --
-- --
0.1 1.0
-- --
1.0 10.0
A A
Rev.2.00 Mar 30, 2006 page 3 of 9
HD74HC4066
Switching Characteristics (CL = 50 pF, Input tr = tf = 6 ns, VEE = GND)
Ta = 25C Item Propagation delay time Symbol VCC (V) tPLH 2.0 4.5 6.0 tPHL 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 4.5 4.5 4.5 2.0 4.5 6.0 4.5 2.0 4.5 6.0 Cin Cin/out Cin/out CPD Min -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Typ 25 6 5 25 6 5 -- 4 -- -- 10 -- -- 14 -- 0.05 30 -50 25 60 75 -50 20 30 30 5 6 0.5 13 Max 60 12 10 60 12 10 50 10 9 115 23 20 115 23 20 -- -- -- -- -- -- -- -- -- -- 10 -- -- -- Ta = -40 to +85C Min -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Max 75 15 13 75 15 13 65 13 11 145 29 25 145 29 25 -- -- -- -- -- -- -- -- -- -- 10 -- -- -- dB RL = 10 k, CL = 50 pF, fIN = 1 kHz MHz RL = 600 , CL = 50 pF, 20 log10Vout/Vin = -3dB dB mA RL = 600 , CL = 50 pF, fIN = 1 MHz RL = 600 , CL = 50 pF, fIN = 1 MHz % ns RL = 1 k ns Unit ns Test Conditions RL = 10 k Switch input to switch output
Propagation delay time Output enable time Output disable time Sine wave distortion Band width (-3 dB) Feed through attenuation Cross talk between control input to signal I/O Cross talk between any two switches Maximum control frequency Control input capacitance Switch I/O capacitance Feed through capacitance Power dissipation capacitance
tPLH tPHT tZH
ns
RL = 10 k
tLZ tHZ
ns
RL = 1 k
RL = 600 , CL = 50 pF, fIN = 1 MHz MHz RL = 1 k, CL = 15 pF, Vout = 1/2 (VCC) pF pF pF pF
Rev.2.00 Mar 30, 2006 page 4 of 9
HD74HC4066
Test Circuit
Maximum Control Frequency
VCC VCC VC 0V VCC Vin = VCC GND
VC
Vout RL = 1 k CL = 15 pF Vout Vcc/2
Cross talk (Control Input to Switch Output)
tr VCC VCC Vin Rin = 600 VCC/2 GND Vout RL = 600 VCC/2 CL = 50 pF VC GND 10% 10% tf
VC
VCC
90%
(f = 1 MHz) tr = tr = 6 ns
Feed through Attenuation
VC = GND 0.1 F fin
VCC Vin (Sine Wave) VCC (OFF) GND
Vin
Vout RL = 600 VCC/2 (Vin = 0 dBm, f = 1 MHz) CL = 50 pF
Rin = 600 VCC/2
Sine Wave Distortion
VCC Vin (Sine Wave) fin Vin 10 F VCC (ON) GND Vout RL = 10 k VCC/2 CL = 50 pF (Vin = 4 Vp-p, f = 1 kHz)
VC = VCC
Rev.2.00 Mar 30, 2006 page 5 of 9
HD74HC4066 Cin, Cout, Cin-out (Input, Output, and Feed through Capacitance)
Cin-out
VC = GND
5V
VCC Signal Input Pin Cin (OFF) GND Cout Commom Pin
Switch Frequency Response Band Width (-3dB)
VC = VCC 0.1 F fin
VCC Vin (Sine Wave) Vin VCC (ON) GND Vout RL = 600 VCC/2 (Vin = 0 dBm, f = 1 MHz) CL = 50 pF
Rin = 600 VCC/2
RON: ON Resistance
VC = VIH VCC
Vin
I/O
VCC (ON) GND
O/I
Vout
V
Vin-out
IS (OFF): OFF Channel Leakage Current (Switch OFF)
VC = VIL VCC
Vin = VCC or GND
I/O A
VCC (OFF) GND
Vout = VSS or VCC
Rev.2.00 Mar 30, 2006 page 6 of 9
HD74HC4066 IS (ON): OFF Channel Leakage Current (Switch ON)
VC = VIH VCC
Vin = VCC or GND
I/O A
VCC (ON) GND
Vout OPEN
tPLH, tPHL: Propagation Delay Time (Switch Input to Switch Output)
tr VCC VCC VCC Vin (ON) GND RL = 10 k CL = 50 pF Vout VOL Vout Vin GND VOH 50% 50% 10% 50% tPLH 90% 50% 10% tPHL tf
VC = VIH
tZH, tZL/tHZ, tLZ: Output Enable and Disable Time
tf tr
VCC VC = Vin VCC VINH Vin VCC Vout GND VCC GND GND VCC RL = 1 k CL = 50 pF Vout VOL VOH Vout VOL VOH GND
90% 50% 10% tZH 10% tHZ
90% 50%
90% 50%
tZL 50%
tLZ
10%
Rev.2.00 Mar 30, 2006 page 7 of 9
HD74HC4066
Package Dimensions
JEITA Package Code P-DIP14-6.3x19.2-2.54 RENESAS Code PRDP0014AB-B Previous Code DP-14AV MASS[Typ.] 0.97g
D
14
8
1 b3
7
Z
A
E
Reference Symbol
A1
Dimension in Millimeters
Min
e
bp
e1
c
( Ni/Pd/Au plating )
e1 D E A A1 bp b3 c e Z L
Nom Max 7.62 19.2 20.32 6.3 7.4 5.06
L
0.51 0.40 0.48 0.56 1.30 0.19 0.25 0.31 0 15 2.29 2.54 2.79 2.39 2.54
JEITA Package Code P-SOP14-5.5x10.06-1.27
RENESAS Code PRSP0014DF-B
Previous Code FP-14DAV
MASS[Typ.] 0.23g
*1
D 8
F
14
NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET.
bp
HE
E
Index mark
*2
Terminal cross section ( Ni/Pd/Au plating )
1 Z e
*3
7 bp x M L1
Reference Symbol
c
Dimension in Millimeters
A1
y
L
Detail F
D E A2 A1 A bp b1 c c1 HE e x y Z L L1
Min Nom Max 10.06 10.5 5.50 0.00 0.10 0.20 2.20 0.34 0.40 0.46 0.15 0.20 0.25 0 8 7.50 7.80 8.00 1.27 0.12 0.15 1.42 0.50 0.70 0.90 1.15
Rev.2.00 Mar 30, 2006 page 8 of 9
A
HD74HC4066
JEITA Package Code P-SOP14-3.95x8.65-1.27 RENESAS Code PRSP0014DE-A Previous Code FP-14DNV MASS[Typ.] 0.13g
*1
D 8
F
14
NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET.
bp
Index mark
HE
E
*2
Terminal cross section ( Ni/Pd/Au plating )
Reference Symbol
c
Dimension in Millimeters
Min
1 Z e
*3
7 bp x M L1
A1
L
y
Detail F
D E A2 A1 A bp b1 c c1 HE e x y Z L L1
Nom Max 8.65 9.05 3.95
0.10 0.14 0.25 1.75 0.34 0.40 0.46 0.15 0.20 0.25 0 8 5.80 6.10 6.20 1.27 0.25 0.15 0.635 0.40 0.60 1.27 1.08
JEITA Package Code P-TSSOP14-4.4x5-0.65
RENESAS Code PTSP0014JA-B
Previous Code TTP-14DV
MASS[Typ.] 0.05g
*1
D
A
F 8
14
NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET.
bp
HE
*2
E
Index mark
Terminal cross section ( Ni/Pd/Au plating )
1 Z e
*3
c
7 bp x M L1
Reference Symbol
Dimension in Millimeters
A1
L
y
Detail F
D E A2 A1 A bp b1 c c1 HE e x y Z L L1
Min Nom Max 5.00 5.30 4.40 0.03 0.07 0.10 1.10 0.15 0.20 0.25 0.10 0.15 0.20 0 8 6.20 6.40 6.60 0.65 0.13 0.10 0.83 0.4 0.5 0.6 1.0
Rev.2.00 Mar 30, 2006 page 9 of 9
A
Sales Strategic Planning Div.
Keep safety first in your circuit designs!
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
http://www.renesas.com
Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510
(c) 2006. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .6.0

▲Up To Search▲

Price & Availability of HD74HC4066FPEL

	To Download HD74HC4066FPEL Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .